430mm Pull-type Eaton Clutch

You are here: Home » Products » Fast·Eaton clutch » 430mm Pull-type » 430mm Pull-type Eaton Clutch
Clutch Type :
430mm,single,pull
Engine Torque :
2500N•m max
Clutch Housing :
SAE 1#
Spline Parameter :
SAE 10C-2”
Damper Type: low-rigidity main vibration reduction,with pre vibration reduction
Friction Discs Material:
Organic / ceramic(with corrugated buffer sheet)
Flywheel Type :
flat, stopping diameter:475/470mm
Diameter of mounting bolt distribution circle:
450mm
Weight(kg):
48
430mm Pull-type

430mm Pull-type Clutch

  • Applying the advanced technology of Eaton heavy-duty clutch
  • Longer life and less service needed
  • Highest damper fatigue performance and good hysteresis versus competition
  • Low wear rate at high temperature and high slipping energy
  • HD version has the heaviest pressure plate design in the industry , obtaining the higher resistance to severe duty
  • The most advanced ceramic material in the world
  • Applied to heavy-duty trucks and large buses
Clutch Type
Engine Torque
Spline Parameter
Flywheel Type
Weight
395mm 1280N•m max SAE 10C-1.75” flat, stopping diameter:435mm 34kg
430mm 2500N•m max SAE 10C-2” flat, stopping diameter:475/470mm 48kg
Specifications Of 430mm clutch
Clutch Type
430mm, single, diaphragm spring clutch
Torque Capicity
1600Nm,2000Nm,2200Nm,2500Nm
Separation Form
Pull
Spline Parameter
SAE 10C-2”
Driven Plate
with corrugated buffer sheet?Organic / ceramic friction materials
Damper Type
low-rigidity 6 or 8 springs,main vibration reduction,with pre vibration reduction
Clutch Housing
SAE 1#
Flywheel Type
flat, stopping diameter:475/470mm

EMAC INTERNATIONAL GROUP

Headquartered in the special economic zone of Shenzhen, China, and operating globally, EMAC International Group concentrate in providing power driven system solution as well as complete equipment for transportation, industrial, maritime and energy application filed.

Originating from EMAC International Trade Co., EMAC International Group (Shenzhen Sinogen Power Technology Ltd) was established in 2010. To meet the needs of our customers. EMAC now has three subsidiaries, three domestic joint ventures, two overseas joint ventures and five independently registered brand trademarks. This has enabled us to work across 160 countries and establish relationships with over 5000 business partners.

EMAC’s Brands and Partners



Data Sheet
Diagram
Maintenance
Operation Manual
Order Information
Parts Catalog

Other Items in this category
Request Form
Name: 
*
Email: 
*
Country: 
*
Message: 
Verification:  0 + 7 = ?
Please enter the answer to the sum & Click Submit to verify your registration.
 
Copyright 2008-2023 EMAC International All Rights Reserved.
Sitemap | Top↑
/**/